DPL Good Effect Hair Removal High Power Led Portable Diode Laser Machine Hair Removal Laser 808NM Diode Machine Price

Product Detail

What is Diode Laaer

Diode Laser is a semiconductor device similar to a light-emitting diode (LED). It uses p-n junction to emit coherent light in which all the waves are at the same frequency and phase.
Diode Laser used the TEC (ThermoElectric Cooler) and Sapphire Technology to cool down the treated skin
Diode Laser emits high technology with patterns and strict standards so this can be applied in the hair color from dark to grey, skin color types from white, yellow to light brown.

Working Principle

Diode laser machine is making use of this specific laser wavelength 808nm and make the melanin as the target to selectively work on the hair follicle, and rise the temperature inside of it so as to damage the hair follicle and hair growing place.
When the melanin absorb the laser light, the photo-thermal effect can selectively damage the hair cells, so the hair is permanently remove at the same time it will not damage the normal tissue around the treated skin.
It can also have the effect of refined skin pores and smooth skin texture.
Laser wavelength 808nm can penetrate to the skin depth of its target tissue ( hair papilla) with suitable and lasting time of pulse to heat up. the target tissue while the surrounding tissue of treated area will be affected cause when the right amount of energy works.

Medex Diode Laser Advantages

Safe, Fast permanent & painless Suitable for hair removal of all skin type with effective results
Super Cooling System Ensure the machine non-stop working
Quick Treatment Up to 10Hz repetition rate with 12mm* 12mm spot size, provide a fast in motion treatment and high efficiency and speed
Water Level Sensor To prevent the affection of cooling effect by lack of water
Water temperature sensor To avoid reduction of laser’s service life and skin cooling
Water flow sensor To prevent the laser and the TEC from fatal injuries caused by lack of water

Treatment Parameter Guideline

Parts	Energy	Frequency
Lips hair	12 - 20	1 - 3
Armpit hair	10 - 23	3
Limbs hair	15 - 28	3 - 5
Bikini hair	10 - 20	1 - 3
Hair line	15 - 25	1 - 3
mustache	10 - 25	1 - 3

Specification

Product Name	iMED_LED
Light source	LED
Light spectrum	NIR
Light power	800W
Pulse width	10-300ms
Energy density	1-100J/cm2
Frequency	1-10Hz
Skin type	I-VI
Operation mode	Stamp, Repeat
Spot size	15*15mm2
Cooling system	TEC Sapphire contact cooling/ Water cooling
Cooling temperature	15℃ - 10℃
Size	504635cm
Net weight	25KG

LED technology advantage

LED hair removal technology

LED hair removal use high-power super-emitting LED (Planar LED) array (12 pieces of chip) as a light source, crystal guide pyramid shaping and transmission of NIR beam, act on the subcutaneous, melanin in hair follicle absorb heat, to achieve hair removal effect.

Long lifespan and high stability

Up to 100 million shots and 5 years’ expected service lifetime(less than 10% failure and 20% power attenuation), without any consumable. Stable performance, low malfunction rate, no downtime. Very easy maintenance and after sales services. Low running cost, but high return on investment.

Reasonable light wavelength and spectrum

iMED LED use near infrared light with wavelength 780~850nm, little absorbed by skin tissue and vascular etc., but mainly absorbed by melanin in follicle, so hair removal is highly effective. Light spectrum has width, so can apply to more skin colors including dark skin.

Reasonable light wavelength and spectrum

A Evenly rectangle spot with nice consistency, energy is uniform, no painful feeling during treatment. Surface array light source,lower max. local brightness, no harmful to human eyes though direct watch. B Planar light emitting area, uniform rectangular spot,and the light’s divergence angle is small to 15°, easily penetrate into skin, very deep penetration depth, deep hair follicle also can be treated.

	Diode laser	LED	LED Advantages
Thermal damage	Light power	Similar
	Thermal power	Similar
	Chip size	1*10mm	7.5*7.5mm
	Conclusion	Similar total thermal power, LED has bigger heat dissipation are and smaller heat flow density.
	Heat transfer patch	Pass to the bottom and rear Average path is 1.5mm	Pass to the bottom Average path is just 0.2mm
	Conclusion	LED has very short heat transfer path, lower thermal resistance and much higher efficiency of heat dissipation.
Mechanical damage	Stress	Rectangle, high length-width ratio. Under stress of thermal deformation and thermal fatigue, chips easily desoldering or broken in pulsed working	Square, 1:1 length-width ratio. Extra thin chip and large soldering area firmly but low stress.
Mechanical damage	Conclusion	Because of chip structure, LED chip’s stress is smaller than diode laser
Optical damage	Light power	Similar
Optical damage	Light emitting area	Size 0.01*0.1mm High brightness, foreign body pollution can cause light-emitting surface burned	Size 5*5mm Brightness is just similar to normal LED lamp of flashlight, slight dust will not being ignited to burn the lighting surface
	Conclusion	Because of surface emitting, the brightness of LED light emitting area is much smaller than diode laser.
Chain damage		Not like diode laser, for LED chips, single area’s failure does not affect other emitting area

Before & After

Company Profile

CUSTOMER FEEDBACK

Product Tags

DPL Good Effect Hair Removal High Power Led Portable Diode Laser Machine Hair Removal Laser 808NM Diode Machine Price Related Video:

DPL Good Effect Hair Removal High Power Led Portable Diode Laser Machine Hair Removal Laser 808NM Diode Machine Price

Reasonable light wavelength and spectrum

Reasonable light wavelength and spectrum

Related Products